TV Installation • Cable Concealment • Wall Brackets • Sydney Wide Service
TV Wall Mounting Sydney
Secure. Straight. Cleanly finished.
Professional TV wall mounting and installation across Sydney, including secure mounting for TVs of all sizes, cable concealment, bracket installation, and a clean finish for homes and businesses.
Fixed, tilt & full-motion
Clean cable management
Antenna, Foxtel & data
Homes & businesses
Mounting
- TV wall mounting
- Bracket installation
- Fixed wall mounts
- Tilt wall mounts
- Full-motion wall mounts
Position & cabling
- TV positioning
- Height and viewing-position assessment
- Cable organisation
- Concealment options where practical
Connections & setup
- Antenna connection
- Foxtel connection
- Data/network connection
- TV setup and tuning
- Final alignment and checking
Tell us what equipment you already have and what you want the finished setup to look like.
What’s included
Professional TV wall mount installation
We mount televisions in living rooms, bedrooms, media rooms, offices and commercial spaces across Sydney. Depending on your setup, the service can include:
Fixed TV wall mount
A fixed mount keeps the television close to the wall and works well where the viewing position is directly in front of the TV.
Good for
- Living rooms with a fixed seating position
- Bedrooms
- Clean, low-profile installations
- TVs mounted at a comfortable eye level
Tilt TV wall mount
A tilt bracket allows the screen angle to be adjusted vertically.
Good for
- TVs mounted slightly higher on the wall
- Bedrooms
- Situations where reducing the viewing angle helps
- Installations above some furniture setups
Full-motion TV wall mount
A full-motion bracket can allow the television to extend away from the wall, swivel and change viewing direction.
- Open-plan rooms
- Multiple viewing positions
- Corner installations
- Rooms where you want more flexibility
Full-motion installations place different loads and movement on the mounting system, so wall construction and bracket suitability are especially important.
Bracket types
Fixed, tilt or full-motion TV mount?
The right bracket depends on the room and how you want to use the television.
Viewing height
Seating position
Screen size
Furniture
Existing connections
Wall construction
Position
Where should your TV be mounted?
Position matters more than most people think. Before drilling into the wall, we consider:
Foxtel
Mounting a TV with Foxtel?
Plan the connections before the TV goes on the wall. Depending on your setup, you may need access for:
- Foxtel cabling
- TV antenna connection
- HDMI cables
- Ethernet/data cable
- Power
If the existing Foxtel or TV outlet is in the wrong position, we can discuss the related cabling work as part of the overall setup.
Smart TV? Consider the network connection too.
Streaming televisions rely heavily on the home’s network. If the TV location has poor Wi-Fi or you prefer a wired network connection, it makes sense to consider that before the television is permanently mounted.
Prime Antennas Sydney also provides:
- Ethernet cabling
- Data points
- Wired Smart TV connections
- Home networking
- Network cabling for media areas
Reception
TV reception poor after moving the television?
The wall mount may not be the problem. If the TV works in one location but reception becomes poor after moving it to another outlet, the issue may be related to the:
- TV point
- Coaxial cable
- Connection
- Splitter
- Existing antenna system
We can investigate antenna and reception problems separately rather than assuming the television itself is faulty.
One visit
More than just the antenna
Need other TV or cabling work? Prime Antennas Sydney has four core services.
We plan before we drill
More than just TV mounting
Clean finish matters
Clear advice
Residential & commercial
Why us
Why choose Prime Antennas Sydney?
Have these ready where possible
- Your TV
- TV remote
- Wall-mount bracket if you're supplying one
- Foxtel or media equipment being connected
- Access to the proposed wall area
- A rough idea of your preferred TV position
Not sure about the position? That’s fine. We can discuss the setup before the installation begins.
TV wall mounting, start to finish
01
Send us your suburb, TV size, wall location and any photos you have.
02
03
04
The TV and relevant connections are installed as agreed.
05
We check the final position, alignment and relevant connections before finishing the job.
The cost depends on the TV size, bracket type, wall construction, mounting position and any cable or connection work required.
Send us your TV size, suburb and photos of the wall for a more useful estimate.
Yes. Tell us the screen size and model where possible so the installation requirements can be assessed properly.
Yes. We work with fixed, tilt and full-motion TV wall mount setups. The right option depends on the room, TV and viewing requirements.
Cable concealment options depend on the wall construction, access and the type of cables involved. We aim for the cleanest practical result and explain the available options before the work begins.
Fixed electrical wiring or power-point alterations are electrical work and need to be handled by an appropriately licensed electrician. We can still plan the TV mounting and AV/TV connections around the existing electrical setup.
Yes. Send us the TV and bracket details so we can consider whether they're suitable for the installation.
TVs can be mounted on different suitable wall constructions, but the installation method varies. We'll assess the proposed location before proceeding.
Yes. Antenna and TV-point work are among our core services and may be combined with TV wall mounting depending on the job.
Yes. Foxtel and TV point installation is one of our four main services.
Yes. Our Data Cabling & Home Networking service includes Ethernet and network-point installation.
Yes. We work in houses, apartments, units and other residential properties. Building rules or access requirements may apply in some apartment and strata properties.
Yes. We also provide TV mounting for offices and other commercial spaces.
Yes. Send us your suburb, TV size and a photo of the proposed mounting area for the best starting point.
FAQ
